Avalanche FFFP ARC 3X3 NV Foam

Avalanche FFFP ARC 3x3 NV
Fomtec Avalanche is a high efficiency multi purpose film forming fluoro protein foam (3x3) concentrate. Fomtec Avalanche is a liquid based on environmentally friendly natural protein and does not contain any polymer that makes general AR type foam concentrates viscous. Its high fluidity makes the induction easier and accurate through both portable and fixed inline proportioners even at extremely low temperatures (-18 C). The advantage of Fomtec Avalanche is the 3% induction ratio on ALL class B fires including polar solvents in fresh or seawater.

Description
Fomtec FFFP ARC 3x3 NV Avalanche is a high efficiency multi purpose film forming fluoro protein foam (3x3) concentrate.

Fomtec Avalanche is a liquid based on environmentally friendly natural protein and does not contain any polymer that makes general AR type foam concentrates viscous. Its high fluidity makes the induction easier and accurate through both portable and fixed inline proportioners even at extremely low temperatures (-18 C).

The advantage of Fomtec Avalanche is the 3% induction ratio on all class B fires including polar solvents in fresh or seawater.

The low surface tension of the water foam concentrate solution enables the aqueous film, although heavier than the burning liquid, to float on top of the hydrocarbon fuel surface.

The specially selected fluorocarbon surfactants 'seal' the bubbles against attack from polar solvents and also provide a highly effective floating foam layer on top of the polar solvents.

Application
Fomtec Avalanche is intended for use on class B hydrocarbon fuel as well as on polar solvent i.e Isopropanol, Methanol etc and other foam destroy-ing product fires such as MTBE. It can be used with both aspirating and non-aspirating discharge devices. Typical applications are bulk storage tank protection, process areas, power stations, marine terminals, municipal fire departments, offshore platforms etc. It is compatible with all dry chemical powders.

Typical Performance
Fomtec Avalanche has been designed to give the best properties of
Aqueous film forming foam.
Alcohol resistant foam.
Fluoro protein foam.

The fire performance of Fomtec Avalanche has been tested according to EN 1568 parts 3 and 4.

Proportioning
Fomtec Avalanche can easily be proportioned at the correct dilution using conventional equipment such as:

Inline inductors.
Balanced pressure, variable flow proportioning systems.
Bladder tanks.
Around the pump proportioning systems.
Water turbine driven foam proportioners.
Self inducting branch pipes and nozzles.

The equipment should be designed to the foam type.

Technical data;
Appearance; Dark brown Liquid
Specific gravity @20°C 1.18 +/- 0.01 g/ml
Brookfield Viscosity approx @ 20°C <20 mPa.s
pH 7.0 +/- 1.0
Undissolved solids (v/v) Less than 0.2 %
Freezing point - 20°C
Pour point -19°C
Surface tension approx < 20.0 mN/m

Storage/Shelf Life
Stored in original unbroken packaging the product will have a long shelf life. The recommended storage temperature range of Fomtec Avalanche ranges from -19°C to 50°C. Shelf life in excess of 10 years will be found in temperate climates. As with all foams, shelf life will be dependent on storage temperatures and conditions. If the product is frozen during storage or transport, thawing will render the product completely usable.

Foam concentrates should only be stored in stainless steel or plastic containers. Since electromagnetic corrosion can occur at joints between different metals when they are in contact with foam concentrate, only one type of metal should be used for pipelines, fittings, pumps, and tanks employed in the storage of foam concentrates.

Packaging
We supply Fomtec in 25 litre cans and 200 litre drums. We can also ship in 1000 litre containers or in bulk.

International Approvals; EN 1568 Parts 3 & 4 Class 1A